goodbusiness16@gmail.com
www.steelpipemakingmachine-tubemill.com
pipe making machine, Pipe mill, ERW tube mill line, China welded pipe production line manufacturers
The mill is intended for manufacturing of round pipe of Φ12mm-Φ32mm with thickness of 0.3mm–2.0mm from cold-rolled and hot-rolled coil strip by means of unclosed tubular blank with its subsequent welding into tube, edge heating by means of solid state high-frequency welder, longitudinal seam welding in rolls of tube welding machine, cooling, further sizing or shaping and on-stream cutting of endless tube in measured lengths.
Finished product will be of round, square or rectangular pipe.
II. The technical flow of the production line
{SteelTape}→→ Double-head un-coiler →→Strip-head Cutter and welder→→
Spiral Accumulator→→Forming section(Flattening unit +Main driving unit +Forming unit +Guide unit +High frequency induction welding unit +squeeze roller)+ De-burr frame →→Cooling unit →→ Sizing unit and straightener →→Flying saw under computer-control →→ Run-out table
III. Basic conditions:
a) Steel Pipe Specification
1. Pipe diameter: Ø12–Ø32mm
Pipe Thickness: 0.3– 2.0mm
2. Square & Rectangle Pipe: 10X10mm –25X25mm
Pipe Thickness: 0.3 – 1.5mm
3. Pipe Length: 6.0m – 9.0m
4. Length Tolerance: 0-6mm
b) SteelTape Specification
1. Material: Carbon steel (Q195)
2. Steel Tape: Inner diameter: Φ470-Φ510mm
Outer diameter: Φmax=1500mm
Strip steel width: 25mm-100mm
Strip steel thickness: 0.3mm-2.0mm
The maximum weight: 1.0 tons
c) Electric installed capacity: appro. 300KW
d) Size of the whole line: appro. 40X5m
e) Line Speed: 50-120m/min
|
|
PIPE MAKING MACHINE,TUBE MILL LINE Images
|
